- Selleys Quick Fix Non Drip Gel Supa Glue has a thick gel consistency which means repairs can be done with less mess but just as quick.
- There is also no immediate finger bonding and it is perfect for vertical repairs as it's non drip.
Features:
- Bonds a variety of surfaces
- Fast setting (20 - 60 seconds)
- Dries clear for clean, neat results
- Water resistant
- No clamping necessary
- Maximum strength achieved in 12 hours
- Self piercing, clog free cap
- No immediate finger bonding*
- *Adhesive will stick skin, but this is delayed – 20 to 30 seconds, depending on skin type and amount of adhesive.
- Forms a rigid bond
- Non-drip gel consistency is ideal for vertical jobs
Where can this product be used?
- The non-drip gel consistency makes it particularly useful on vertical surfaces
- Ideal for small repair jobs or when fast results are required
- For interior projects and repairs.
What materials is this product suitable for?
Bonds a variety of porous and non-porous surfaces
- Ceramic
- China
- Paper
- Metal
- Wood
- Leather
- Most plastics**
- **Not suitable for bonding plastics such as Polypropylene and Polyethylene. Use Selleys All Plastic Fix.
Directions:
- Ensure surfaces to be bonded are clean, dry, free of dust, and close fitting.
- Pierce seal at the end of the tube by attaching nozzle and cap and turning clockwise.
- Remove cap and apply a small amount of glue to one surface. Bring surfaces together, Allow 30 minutes for sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
- Wipe tip of tube, replace cap and store upright in a dry cool place.
Handy tips:
- Supa Glue can create a white residue on the surface of a material if the area is not well ventilated. Clean the affected area with acetone, to remove residue.
- Use on vertical surfaces
- Excellent when used with other adhesives, as a temporary tack.
- After use, wipe excess product from the nozzle with a tissue dipped in nail polish remover.
- In the event that fingers get stuck together - don't panic! Slowly twist fingers in opposite direction in hot soapy water.
- Quick Fix Non Drip Gel is good for use on wood and porous surfaces (e.g terracotta pots) as it doesn't soak into the surface like a liquid super glue would.
- Acetone ( most nail polish remover) or Olive oil can also be used to remove Quick Fix from skin.
- Since Quick Fix cures with moisture, set times may be extended on very dry surfaces or under dry conditions.
- Super glues cure more slowly when large amounts are used. For faster cure use sparingly.
- Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.
- *Adhesive will stick skin, but this is delayed – 20 to 30 seconds, depending on skin type and amount of adhesive.
- May cause some leather to discolour or harden – pre-test on an inconspicuous area.
Clean Up:
- Uncured product may be removed with acetone.
- Cured product can be sanded and scraped
